Well since i had a coolant leak i decided to finally install the aluminum radiator i bought off ebay a while ago. It was designed for a 128 or so it said but it was not plug and play. It is thicker and taller than the oem unit so i had to grind the lower bracket off and make a custom one. The upper mount holes were off so i had to slot them. The fan shroud was way too big so i bought a smaller shroud (1100 model?)from Obert but the fan wouldnt fit in the shroud as the blades were too long so i bought an aftermarket low profile fan. If this setup cools the 1300 i will be very pleased cause it looks good and provides much more space to work at the feont end.