lookforjoe
True Classic
EDIT: Since the PB debacle, I have been gradually adding back all the pictures that I can. It is difficult in many cases to ensure the order. All the coilover construction pics are gone
EDIT: My front panels installation starts here (July 2016)
Rear Panel work starts here (Sept 2016)
Edit: Note - tail lights were done years prior - Hella 4169 series were used
Primer and Paint work starts here (July 2018)
K24 Conversion begins (Aug 2018)
Dallara Stripes here (Mar 2020)
Dallara 2.0 here (May 2020)
*****************************************************
I have the Dallara kit (3 layer, street) on order (Rcvd. 04/2015).
Related/reference threads so far:
Restoration Inspiration Dallara Kit For Sale..? What's involved in fitting Dallara Kit?
Racheljf's Dallara blog
Racheljf's Dallara Blog II
Strut Info needed DIY Coilovers
My Coilovers (credit to Doug)
Coilover install/test fit (Sept 2016) - Jovani's Ford Strut Mount Install KYB SM5607 or similar
EDIT: Newer thread with more pics from DallaraX1/9
EDIT: Thread discussion on Prototipo / Dallara Headlamp Conversion
EDIT: Headlamp (79 Bronco 6052's) Starts HERE
I'll use this thread to determine/document all the odds & ends I need to resolve for the install.
My main concerns right now are finding wheels that will work well, whether custom (DiamondRacing, etc) or Honda aftermarket, etc that are readily available, and figuring out the correct spacers based on that.
EDIT: Used 15x8" zero-offset Corsa XR wheels from VickAuto, with hubcentric rings for the front (58.1 bore, 73 OD) and 1.5" hubcentric spacers for the rear. 225/45ZR15, 205x50ZR15 tires
EDIT: Alternate wheels - Rota "Kensei" zero-offset 67.1 bore 15x8 & 15x9 (requires 4x100 adaptors or wobble bolts) Rota TBT 15x8 zero offset 67.1 bore.
I've messaged a few folks that I found with Dallara type body kits to hopefully get some specific wheel/spacer info based on their experience.
I'm going to do DIY coilovers, based on and with info provided by Doug (rx1900). Using Bilstein B8's # 34-184530
& QA1 2.5" ID - 140/250 10" progressive springs ( QA1-10-140-250 from Summit Racing )
Rear springs replaced with QA1 175/350 12" for K24 conversion (Oct 2018)
I'm trying to wrap my head around the permutations that arise with varying wheel offsets and backspacing, the relationship of the two, and how to do the math to figure all that out. I hate math. It doesn't come readily to me, so what may be an obvious computation for many requires pictures, diagrams charts, etc., for it to make any sense to me.
Charlie (Serpent Auto) suggested I stick with 4bolt - 4bolt spacers. I had asked him about the feasibility of going from 4x98 to 5x108 (to possibly use Volvo wheels :nuts So if not custom wheels from Diamond or similar, then likely 4x100 to take advantage of all the Honda stuff.
Problem with that is the lack of dish on FWD based offset wheels.
Matt's backspacing recommendations:
"Regarding the wheels.
Front: 15x7 - 87mm backspacing. 195/45/15 or 195/50/15 tire.
Rear 15x9 - 100mm backspacing with 225/45/15, or 245/40/15"
Some diagramatic examples:
Example of offset permutations on Diamond's website:
So, any input would be most appreciated!
EDIT: My front panels installation starts here (July 2016)
Rear Panel work starts here (Sept 2016)
Edit: Note - tail lights were done years prior - Hella 4169 series were used
Primer and Paint work starts here (July 2018)
K24 Conversion begins (Aug 2018)
Dallara Stripes here (Mar 2020)
Dallara 2.0 here (May 2020)
*****************************************************
I have the Dallara kit (3 layer, street) on order (Rcvd. 04/2015).
Related/reference threads so far:
Restoration Inspiration Dallara Kit For Sale..? What's involved in fitting Dallara Kit?
Racheljf's Dallara blog
Racheljf's Dallara Blog II
Strut Info needed DIY Coilovers
My Coilovers (credit to Doug)
Coilover install/test fit (Sept 2016) - Jovani's Ford Strut Mount Install KYB SM5607 or similar
EDIT: Newer thread with more pics from DallaraX1/9
EDIT: Thread discussion on Prototipo / Dallara Headlamp Conversion
EDIT: Headlamp (79 Bronco 6052's) Starts HERE
I'll use this thread to determine/document all the odds & ends I need to resolve for the install.
My main concerns right now are finding wheels that will work well, whether custom (DiamondRacing, etc) or Honda aftermarket, etc that are readily available, and figuring out the correct spacers based on that.
EDIT: Used 15x8" zero-offset Corsa XR wheels from VickAuto, with hubcentric rings for the front (58.1 bore, 73 OD) and 1.5" hubcentric spacers for the rear. 225/45ZR15, 205x50ZR15 tires
EDIT: Alternate wheels - Rota "Kensei" zero-offset 67.1 bore 15x8 & 15x9 (requires 4x100 adaptors or wobble bolts) Rota TBT 15x8 zero offset 67.1 bore.
I've messaged a few folks that I found with Dallara type body kits to hopefully get some specific wheel/spacer info based on their experience.
I'm going to do DIY coilovers, based on and with info provided by Doug (rx1900). Using Bilstein B8's # 34-184530
& QA1 2.5" ID - 140/250 10" progressive springs ( QA1-10-140-250 from Summit Racing )
Rear springs replaced with QA1 175/350 12" for K24 conversion (Oct 2018)
I'm trying to wrap my head around the permutations that arise with varying wheel offsets and backspacing, the relationship of the two, and how to do the math to figure all that out. I hate math. It doesn't come readily to me, so what may be an obvious computation for many requires pictures, diagrams charts, etc., for it to make any sense to me.
Charlie (Serpent Auto) suggested I stick with 4bolt - 4bolt spacers. I had asked him about the feasibility of going from 4x98 to 5x108 (to possibly use Volvo wheels :nuts So if not custom wheels from Diamond or similar, then likely 4x100 to take advantage of all the Honda stuff.
Problem with that is the lack of dish on FWD based offset wheels.
Matt's backspacing recommendations:
"Regarding the wheels.
Front: 15x7 - 87mm backspacing. 195/45/15 or 195/50/15 tire.
Rear 15x9 - 100mm backspacing with 225/45/15, or 245/40/15"
Some diagramatic examples:
Example of offset permutations on Diamond's website:
So, any input would be most appreciated!
Last edited: