Misc. 124-X1/9-850 parts

Misc. Fiat X1/9 & 124 parts

A few random items for sale...

SOLD - Fiat X1/9 & 124 rear brake calipers set (1 left/1 right), used condition & ready to rebuild, 124A100 casting number. SOLD





1974 Fiat 124 Coupe Emissions/Tune-Up Specs alloy ID plate, mounts on top of upper radiator mount crossmember in engine bay. $5




SOLD - Small lot of 5 OE black plastic centercaps for Fiat 124 Cromodora "Iron Cross" (13" & 14" versions) & Fiat X1/9 Cromodora CD91 alloy wheels, may also fit other Cromodora models. Fair condition, 2 have anodized alloy centers (shown on right) instead of the more common plastic center, 2 caps have 1 rear mount tensioner tab broken off (caps still fit securely in wheel, though). SOLD





All prices exclude USPS shipping from 92860, payment via Paypal preferred, thanks.

Dibbs on the 5 wheel center caps

PM Sent.

Ok.

bg82x said:

Dibbs on the 5 wheel center caps. PM Sent.

Click to expand...

PM returned.

And a few more items...

SOLD - Fiat 124 Coupe Veglia gauges set; includes speedo, tach, oil pressure, fuel level & coolant temp gauges. Good used condition (glass lenses need cleaning inside), includes rear wiring connectors & all original mounting brackets/hardware, as shown. These were supposedly only used on the later 124 Coupe models, they differ from earlier 124 Coupe & regular 124 Spider gauges by having a semi-reflective white/light gray internal rim/perimeter which tends to "stand out" more when lit up at night. SOLD




SOLD - Good used Fiat 124 Coupe silver ribbed-alloy gauge panel, includes 4 of the 5 mounting screws/retainer clips & the "Fasten Seat Belts" warning light unit, as shown. SOLD

SOLD - 124 "B-Series" Coupe taillights set. Matched pair - 1 right side, 1 left side. Good-condition chrome on outer perimeter of housings, removable center chrome strip on passenger-side lamp has some pitting. All lenses are crack-free but have sun fading (the lower lenses moreso than the upper ones). The upper lenses should polish up nicely, the lower ones...? All rear mounting studs are intact, the 2 center studs (for the lens-retainer chrome strip) on the passenger-side lamp are non-original (slightly oversized) replacements done by the previous owner. The black rubber rear housing gaskets are intact, but have some light paint overspray (mainly on the bottom edge) & have shrunken slightly from age (applying heat from a hair dryer or paint-stripping gun should make them pliable enough to stretch back over the edges of the lamp housings prior to installing the taillights on the car). SOLD




124 "B-Series" Coupe rear chrome bumper blade. Fairly good condition overall, hazy chrome finish, a few small dents around the original overrider mounting locations, one small ding on the very edge of the passenger-side rear corner (see detail photo). Includes the original license plate lamp (missing the lens & top cover) & the mounting bracket for the center-mounted Reverse/back-up lamp, as shown. $50 (In-person pickup preferred due to size & difficulty of packaging)





Fiat 128 (& possibly others) right front sidemarker light black plastic housing #4275504. NOS condition in original Fiat bag. $10






Dashboard top heater/defroster vent black plastic grille #4321108. NOS condition in original Fiat bag. $5

And MORE...

SOLD - Bosch distributor cap for 1979-on Fiat X1/9 with Bosch electronic ignition distributor, also fits Fiat Strada with cam-mounted Bosch EI distributor. NOS condition in original Fiat box, part #9936013. SOLD




SOLD - Fiat X1/9 1300 (1974-78) front disc brake caliper rebuild kits. Set of 2 NOS kits in original bags, each kit contains 1 piston O-ring & 1 dust boot/seal. SOLD




Set of three 40mm intake valves for Fiat SOHC 1300/1500 engine (ie: as on PBS big-valve cylinder head). 40.06mm head, 8mm stem, 108.75mm length, concave-style valve heads (bottoms). No, I don't have a 4th one, sorry. $15

Smog/emissions air pump filter housing + filter (also good for using as a crankcase breather unit); 2 sets available.
Set #1 - used filter housing + 1 NOS filter element. $8.
Set #2 - used filter housing + 2 NOS filter elements. $10.
Set #1 + #2 combined - $15.

Updated.

Added a few more items, cleared out a few that had been sold.

Calipers

If you confirm that the bleeder screws turn, I'll take them.

jon

Re: Calipers

Fiatpwr said:

If you confirm that the bleeder screws turn, I'll take them.

Click to expand...

Well, after a couple rather tense moments with them in the shop this afternoon, I can happily report that, yes, both bleeder screws do turn freely as they should. :headbang:

See PM for payment details. :wink2:

gagues

seriously want those.
building mike mittelsteads x and I only have a mismatched set of 124 and 850 here. tach is deeper than the speedo....
mikemo

mikemo90 said:

seriously want those.
building mike mittelsteads x and I only have a mismatched set of 124 and 850 here. tach is deeper than the speedo....
mikemo

Click to expand...

Ok, I'll get them boxed up & figure out the shipping cost this afternoon, & PM you the details later tonight. :wink2:

See PM.

:wink2: